|
- // Copyright 2011 The Go Authors. All rights reserved.
- // Use of this source code is governed by a BSD-style
- // license that can be found in the LICENSE file.
-
- package ssh
-
- import (
- "bufio"
- "bytes"
- "errors"
- "io"
- "log"
- )
-
- // debugTransport if set, will print packet types as they go over the
- // wire. No message decoding is done, to minimize the impact on timing.
- const debugTransport = false
-
- const (
- gcmCipherID = "aes128-gcm@openssh.com"
- aes128cbcID = "aes128-cbc"
- tripledescbcID = "3des-cbc"
- )
-
- // packetConn represents a transport that implements packet based
- // operations.
- type packetConn interface {
- // Encrypt and send a packet of data to the remote peer.
- writePacket(packet []byte) error
-
- // Read a packet from the connection. The read is blocking,
- // i.e. if error is nil, then the returned byte slice is
- // always non-empty.
- readPacket() ([]byte, error)
-
- // Close closes the write-side of the connection.
- Close() error
- }
-
- // transport is the keyingTransport that implements the SSH packet
- // protocol.
- type transport struct {
- reader connectionState
- writer connectionState
-
- bufReader *bufio.Reader
- bufWriter *bufio.Writer
- rand io.Reader
- isClient bool
- io.Closer
- }
-
- // packetCipher represents a combination of SSH encryption/MAC
- // protocol. A single instance should be used for one direction only.
- type packetCipher interface {
- // writeCipherPacket encrypts the packet and writes it to w. The
- // contents of the packet are generally scrambled.
- writeCipherPacket(seqnum uint32, w io.Writer, rand io.Reader, packet []byte) error
-
- // readCipherPacket reads and decrypts a packet of data. The
- // returned packet may be overwritten by future calls of
- // readPacket.
- readCipherPacket(seqnum uint32, r io.Reader) ([]byte, error)
- }
-
- // connectionState represents one side (read or write) of the
- // connection. This is necessary because each direction has its own
- // keys, and can even have its own algorithms
- type connectionState struct {
- packetCipher
- seqNum uint32
- dir direction
- pendingKeyChange chan packetCipher
- }
-
- // prepareKeyChange sets up key material for a keychange. The key changes in
- // both directions are triggered by reading and writing a msgNewKey packet
- // respectively.
- func (t *transport) prepareKeyChange(algs *algorithms, kexResult *kexResult) error {
- ciph, err := newPacketCipher(t.reader.dir, algs.r, kexResult)
- if err != nil {
- return err
- }
- t.reader.pendingKeyChange <- ciph
-
- ciph, err = newPacketCipher(t.writer.dir, algs.w, kexResult)
- if err != nil {
- return err
- }
- t.writer.pendingKeyChange <- ciph
-
- return nil
- }
-
- func (t *transport) printPacket(p []byte, write bool) {
- if len(p) == 0 {
- return
- }
- who := "server"
- if t.isClient {
- who = "client"
- }
- what := "read"
- if write {
- what = "write"
- }
-
- log.Println(what, who, p[0])
- }
-
- // Read and decrypt next packet.
- func (t *transport) readPacket() (p []byte, err error) {
- for {
- p, err = t.reader.readPacket(t.bufReader)
- if err != nil {
- break
- }
- if len(p) == 0 || (p[0] != msgIgnore && p[0] != msgDebug) {
- break
- }
- }
- if debugTransport {
- t.printPacket(p, false)
- }
-
- return p, err
- }
-
- func (s *connectionState) readPacket(r *bufio.Reader) ([]byte, error) {
- packet, err := s.packetCipher.readCipherPacket(s.seqNum, r)
- s.seqNum++
- if err == nil && len(packet) == 0 {
- err = errors.New("ssh: zero length packet")
- }
-
- if len(packet) > 0 {
- switch packet[0] {
- case msgNewKeys:
- select {
- case cipher := <-s.pendingKeyChange:
- s.packetCipher = cipher
- default:
- return nil, errors.New("ssh: got bogus newkeys message")
- }
-
- case msgDisconnect:
- // Transform a disconnect message into an
- // error. Since this is lowest level at which
- // we interpret message types, doing it here
- // ensures that we don't have to handle it
- // elsewhere.
- var msg disconnectMsg
- if err := Unmarshal(packet, &msg); err != nil {
- return nil, err
- }
- return nil, &msg
- }
- }
-
- // The packet may point to an internal buffer, so copy the
- // packet out here.
- fresh := make([]byte, len(packet))
- copy(fresh, packet)
-
- return fresh, err
- }
-
- func (t *transport) writePacket(packet []byte) error {
- if debugTransport {
- t.printPacket(packet, true)
- }
- return t.writer.writePacket(t.bufWriter, t.rand, packet)
- }
-
- func (s *connectionState) writePacket(w *bufio.Writer, rand io.Reader, packet []byte) error {
- changeKeys := len(packet) > 0 && packet[0] == msgNewKeys
-
- err := s.packetCipher.writeCipherPacket(s.seqNum, w, rand, packet)
- if err != nil {
- return err
- }
- if err = w.Flush(); err != nil {
- return err
- }
- s.seqNum++
- if changeKeys {
- select {
- case cipher := <-s.pendingKeyChange:
- s.packetCipher = cipher
- default:
- panic("ssh: no key material for msgNewKeys")
- }
- }
- return err
- }
-
- func newTransport(rwc io.ReadWriteCloser, rand io.Reader, isClient bool) *transport {
- t := &transport{
- bufReader: bufio.NewReader(rwc),
- bufWriter: bufio.NewWriter(rwc),
- rand: rand,
- reader: connectionState{
- packetCipher: &streamPacketCipher{cipher: noneCipher{}},
- pendingKeyChange: make(chan packetCipher, 1),
- },
- writer: connectionState{
- packetCipher: &streamPacketCipher{cipher: noneCipher{}},
- pendingKeyChange: make(chan packetCipher, 1),
- },
- Closer: rwc,
- }
- t.isClient = isClient
-
- if isClient {
- t.reader.dir = serverKeys
- t.writer.dir = clientKeys
- } else {
- t.reader.dir = clientKeys
- t.writer.dir = serverKeys
- }
-
- return t
- }
-
- type direction struct {
- ivTag []byte
- keyTag []byte
- macKeyTag []byte
- }
-
- var (
- serverKeys = direction{[]byte{'B'}, []byte{'D'}, []byte{'F'}}
- clientKeys = direction{[]byte{'A'}, []byte{'C'}, []byte{'E'}}
- )
-
- // setupKeys sets the cipher and MAC keys from kex.K, kex.H and sessionId, as
- // described in RFC 4253, section 6.4. direction should either be serverKeys
- // (to setup server->client keys) or clientKeys (for client->server keys).
- func newPacketCipher(d direction, algs directionAlgorithms, kex *kexResult) (packetCipher, error) {
- cipherMode := cipherModes[algs.Cipher]
- macMode := macModes[algs.MAC]
-
- iv := make([]byte, cipherMode.ivSize)
- key := make([]byte, cipherMode.keySize)
- macKey := make([]byte, macMode.keySize)
-
- generateKeyMaterial(iv, d.ivTag, kex)
- generateKeyMaterial(key, d.keyTag, kex)
- generateKeyMaterial(macKey, d.macKeyTag, kex)
-
- return cipherModes[algs.Cipher].create(key, iv, macKey, algs)
- }
-
- // generateKeyMaterial fills out with key material generated from tag, K, H
- // and sessionId, as specified in RFC 4253, section 7.2.
- func generateKeyMaterial(out, tag []byte, r *kexResult) {
- var digestsSoFar []byte
-
- h := r.Hash.New()
- for len(out) > 0 {
- h.Reset()
- h.Write(r.K)
- h.Write(r.H)
-
- if len(digestsSoFar) == 0 {
- h.Write(tag)
- h.Write(r.SessionID)
- } else {
- h.Write(digestsSoFar)
- }
-
- digest := h.Sum(nil)
- n := copy(out, digest)
- out = out[n:]
- if len(out) > 0 {
- digestsSoFar = append(digestsSoFar, digest...)
- }
- }
- }
-
- const packageVersion = "SSH-2.0-Go"
-
- // Sends and receives a version line. The versionLine string should
- // be US ASCII, start with "SSH-2.0-", and should not include a
- // newline. exchangeVersions returns the other side's version line.
- func exchangeVersions(rw io.ReadWriter, versionLine []byte) (them []byte, err error) {
- // Contrary to the RFC, we do not ignore lines that don't
- // start with "SSH-2.0-" to make the library usable with
- // nonconforming servers.
- for _, c := range versionLine {
- // The spec disallows non US-ASCII chars, and
- // specifically forbids null chars.
- if c < 32 {
- return nil, errors.New("ssh: junk character in version line")
- }
- }
- if _, err = rw.Write(append(versionLine, '\r', '\n')); err != nil {
- return
- }
-
- them, err = readVersion(rw)
- return them, err
- }
-
- // maxVersionStringBytes is the maximum number of bytes that we'll
- // accept as a version string. RFC 4253 section 4.2 limits this at 255
- // chars
- const maxVersionStringBytes = 255
-
- // Read version string as specified by RFC 4253, section 4.2.
- func readVersion(r io.Reader) ([]byte, error) {
- versionString := make([]byte, 0, 64)
- var ok bool
- var buf [1]byte
-
- for length := 0; length < maxVersionStringBytes; length++ {
- _, err := io.ReadFull(r, buf[:])
- if err != nil {
- return nil, err
- }
- // The RFC says that the version should be terminated with \r\n
- // but several SSH servers actually only send a \n.
- if buf[0] == '\n' {
- if !bytes.HasPrefix(versionString, []byte("SSH-")) {
- // RFC 4253 says we need to ignore all version string lines
- // except the one containing the SSH version (provided that
- // all the lines do not exceed 255 bytes in total).
- versionString = versionString[:0]
- continue
- }
- ok = true
- break
- }
-
- // non ASCII chars are disallowed, but we are lenient,
- // since Go doesn't use null-terminated strings.
-
- // The RFC allows a comment after a space, however,
- // all of it (version and comments) goes into the
- // session hash.
- versionString = append(versionString, buf[0])
- }
-
- if !ok {
- return nil, errors.New("ssh: overflow reading version string")
- }
-
- // There might be a '\r' on the end which we should remove.
- if len(versionString) > 0 && versionString[len(versionString)-1] == '\r' {
- versionString = versionString[:len(versionString)-1]
- }
- return versionString, nil
- }
|